What is Ethernet?
The term Ethernet in basic terms is actually cables connected to a network which inturn send data packets across several networks. This is the most often utilized process used in neighborhood networking. Xerox, DEC and Intel created this current model which was influenced by the Alohanet schematic from years earlier. It was produced in the mid 70s and utilized a 10Mbps network protocol, which was very quickly at that period.
The 10 Mbps protocol remains to be the most favored for most networks, and normally regarded as ‘Standard Ethernet’ as well as 10BASE-T. Many networks are currently using something called the ‘Fast Ethernet’ which uses a 100 Mbps protocol and is known as 100BASE-T. Finally there is the 1000 Mbps protocol which is called the ‘Gigabit Ethernet’. Most LAN systems currently use a Fast Ethernet for the main system, and every one of the computer work stations will use particular 100BASE-T or 10BASE-T cards which the LAN supports.
The Ethernet is classified using international specifications, explicitly IEEE 802.3. It enables the connection of fiber optic cables, up to 1024 coaxial nodes and the twisted-pair cable and the most commonly used may be the Category 5 cable.
The Ethernet functions in such a way that signals are transmitted serially from your primary location to all spots within the network. The Ethernet will employ a CSMA/CD Carrier Sense Multiple Access/Collision Detection. This implies that all locations will hear all transmissions but is only to listen to the ones that have been meant for it.
Every computer inside the network may send out and transmit communications or signals at any time. When two of the computers inside the network send a message at the same time, a collision will occur. The Ethernet keeps track of the collisions and then sends the retransmissions. It will randomly transmit and resend the colliding messages.
With regards to the size of your network you are able to select Standard, Fast or GigaByte Ethernet setups. Naturally, the larger the network the higher the Ethernet setup you need to utilize. If you use the Standard Network but have hundreds of workstations within the network, it may be unable to handle all of the transmissions and will have too many collisions which will decelerate everything.
The author recommends you check out computertooslow.com to get the answers to: what is ethernet and why is my computer slow and much more.